| Tsukayu have 17 different brackets specifically fit your bike |
| |
| 1) Lockable, Quick Detachable Mounting System |
| |
For RoadKing, Softail (Modified) |
Locked 
|
Unlocked
|
|
|
|
| |
|
|
| |
|
|
|
| |
| |
| |
| |
| |
|
|
| 2) Direct Bolt-on mounting system |
| -Tsukayu use direct Bolt-on working with factory windshield mounting system for the following bike |
| -Yamaha Roadliner |
| -Kawasaki VN2000 classic / VN2000 classic LT |
| -Kawasaki Nomad 1600 |
| -Kawasaki Vulcan 1600 classic |
| -First time installation involves fine adjusting the distance between left and right Tsukayu bracket plates by using washers and spacers provided. |
| |
|
| For RoadLiner (NEW) |
|
|
Original factory brackets
 |
 |
|
|
|
|
|
|
After replacing some parts with Tsukayu parts provided
 |
Parts provided
 |
| - Attach / Detach your fairing in minute by just loosen the four nuts. |
| - very strong, mirror-polished, corrosion-free stainless steel mounting brackets |
| - work with factory windshield mount |
| - refer to "Model compatibility" page for application guide |
| |
|
| |
| For VN2000 classic / VN2000 classic LT |
Facing outside
 |
Facing inside
 |
|
| |
| |
| For Nomad 1600 / Vulcan 1600 classic |
|
|
Facing outside
 |
Facing inside
 |
|
| |
|
| |
| |
| 3) Mounting System working with Memphis Shades brackets |
| For metric cruiser and Victory, bike specific. example shown below |
|
|
|
|
|
|
|
Latched
 |
Unlatched
 |
|
|
|
|
|
|
| |
| -Quick Detachabe( but not lockable ) |
| -Stainless steel latch on both left and right bracket plates |
| -Memphis Shades mounting brackets has to be purchaed seperately |
| -Tsukayu will provide bike specific bracket plates that work with specific memphis shades brackets shown in application guide |
| -Some of the original Memphis Shades parts need to be replaced with Tsukayu parts provided |
| -First time installation involves fine adjusting the distance between left and right Tsukayu bracket plates by using washers and spacers provided. |
| -For Memphis shades "No Tool Trigger-Lock" type brackets which has plastic parts, both upper and lower parts needed to be replaced by the parts Tsukayu provided. |
| - refer to "Model compatibility" page for application guide |
| |
Regular type Memphis Shades bracket ( not supplied by Tsukayu)
 |
Modified by replacing the upper spacer
|
|
| |
| |
"No tool trigger lock" type Memphis Shades bracket
(not supplied by Tsukayu)
 |
Modified by replacing the upper and lower spacers
 |
|
| |
 |
|
|
Notice:
*First time installation may involves fine adjusting the distance between left and right Tsukayu bracket plates by using washers and spacers provided(except RoadKing and Softail).
*Assuming with stock handlebar, riser, headlight, etc. Fitment with aftermarket riser, handlebar or any non-stock accessaries is never guaranteed
*All required Memphis Shades brackets / factory windshield mounts are not included, Tsukayu will supply bracket plates that work together with the required Memphis Shades brackets / factory windshield mounts. |
|
| |
| |
| |
| |
